PPR Fitting 45-Degree Elbow: Gentle Direction Change for PPR Pipes

Descrição

PPR Fitting 45-Degree Elbow changes pipe direction gently.

Made of high-purity PPR material for safety and durability.

Connects two same-diameter PPR pipes at 45 degrees.

Creates less flow resistance than 90-degree elbows.

Works for hot/cold water and underfloor heating systems.

BPA-free and safe for drinking water.

Angle precision: exact 45 degrees for smooth flow.

Temperature resistance: up to 95°C (203°F) continuous use.

Pressure resistance: 10 bars (PN10) standard.

Available sizes: 20mm, 25mm, 32mm, 40mm, 50mm.

Smooth inner surface to reduce flow turbulence.

Reinforced joint walls for added strength.

Reduces water flow resistance for better system efficiency.

Prevents water pressure loss in long pipe runs.

Ideal for tight spaces where 90-degree turns are too sharp.

Less stress on pipe joints compared to 90-degree elbows.

Smoother flow reduces noise in plumbing systems.

Better for underfloor heating where flow is critical.

Preheat fusion machine to 260°C (500°F) before use.

Cut PPR pipes squarely and deburr all ends.

Clean elbow ports and pipe ends with a dry cloth.

Fuse each pipe end into the elbow for 5-7 seconds.

Ensure pipes are aligned to maintain the 45-degree angle.

Hold joints for 10 seconds, cool for 30 minutes before testing.

Changing pipe direction in tight spaces (e.g., under sinks).

Underfloor heating systems for gentle flow turns.

Residential plumbing where flow efficiency matters.

Commercial plumbing in offices and small buildings.

Plumbing renovations requiring smooth direction changes.

Solar water heater systems for pipe routing.

The PPR Fitting 45-Degree Elbow enables gentle direction changes.

It reduces flow resistance and pressure loss.

Easy to install with standard thermal fusion tools.

Ideal for tight spaces and flow-critical systems.

Durable, safe, and compatible with all PPR pipes.

A smarter choice than 90-degree elbows for smooth flow.