PPR Fitting 45-Degree Elbow: Low-Turbulence Turn for PPR Pipes

Descrição

PPR Fitting 45-Degree Elbow changes pipe direction gently.

It connects two same-diameter PPR pipes at a 45-degree angle.

Made of food-grade PPR material, safe for drinking water.

It uses thermal fusion to create a permanent, leak-proof joint.

Its smooth internal curve reduces water flow turbulence.

It works for hot/cold water and underfloor heating systems.

It is lighter and more durable than metal 45-degree elbows.

It resists rust and corrosion, unlike brass or steel elbows.

Angle precision: exact 45 degrees for consistent flow direction.

Temperature resistance: up to 95°C (203°F) continuous use.

Pressure rating: PN10 (10 bars) for standard plumbing.

Available sizes: 20mm, 25mm, 32mm, 40mm, 50mm.

Inner diameter matches PPR pipe size to avoid flow restriction.

Reinforced corner design prevents cracking under pressure.

Complies with EN 12201 and ISO 15874 standards.

45-degree elbow: lower flow resistance and less turbulence.

90-degree elbow: sharper turn for tight corner spaces.

45-degree is better for long pipe runs to avoid pressure loss.

90-degree is ideal for compact areas like under sinks.

45-degree reduces noise from water flow in plumbing systems.

Both are easy to install with standard fusion tools.

Preheat the fusion machine to 260°C (500°F) before use.

Cut pipes squarely and deburr all ends to ensure tight fusion.

Clean elbow ports and pipe ends with alcohol wipes to remove debris.

Align pipes to maintain the 45-degree angle during fusion.

Fuse each pipe end into the elbow for 5-7 seconds.

Hold the joint for 10 seconds, then let it air cool for 30 minutes.

Use pipe supports to avoid stress on the elbow joint.

Changing pipe direction in underfloor heating systems.

Routing pipes in tight spaces where 90-degree turns are too sharp.

Reducing turbulence in high-flow residential plumbing.

Connecting PPR pipes in commercial HVAC systems.

Plumbing renovations requiring gentle direction changes.

Solar water heater pipe routing to avoid pressure loss.

The PPR Fitting 45-Degree Elbow enables gentle direction changes.

It reduces flow turbulence and pressure loss in pipe systems.

Easy to install with standard thermal fusion tools.

Durable, safe, and compatible with all PPR pipes.

Ideal for long runs and flow-critical applications.

A smarter choice than 90-degree elbows for smooth flow.